Jabra VBT4050

Item no: 100-92100020-08
  • Easy to use, wear and enjoy
  • Pair it with two Bluetooth-enabled devices at the same time
  • Talk for up to 6 hours and get 8 days of standby time
  • Crystal clear sound and voice (DSP technology)
Jabra EASYVOICE close up of ear hookEasy to installTo get started enjoying hands-free conversations, you just pair VBT4050 with your device of choice. It gives you voice-guided instructions and tells you once the pairing is successful.

You can pair it with up to two devices at the same time, so you can use it with your mobile phone and laptop. It even lets you know when it’s time to recharge. If only everything was this easy.

Verizon Wireless Once you’re up and running, you’ll find that your calls are clearer and crisper on the VBT4050. It utilizes digital signal processing (DSP) to optimize your voice. When you’re in noisy surroundings, the headset automatically adjusts your call volume, maintaining a safe volume level and keeping your conversation clear and understandable. With its comfortable eargels, earhook and lightweight design, you can talk for hours from your car to your office and back again.

Was this useful?
Yes No

Thank you for your feedback

The information you provide will be used to improve the page.

We will not respond directly to your comments.

Please go to Contact if you need further assistance.

Thank you for your feedback

The information you provide will be used to improve the page.

Help Us Get Better

Please tell us why you didn't find this useful

How can we make this more useful for you?

Send Feedback Cancel

Specifications

  • Connectivity

    • Wireless Technology: Bluetooth
      Supports Bluetooth™ for wireless connectivity
    • Bluetooth version: 2.1
      Supports Bluetooth® version 2.1
    • AVRCP: No
      This device does not support AVRCP, meaning you cannot control your music directly from the device
    • Auto Pairing: Yes
      With Auto Pairing, a device pairs automatically with Bluetooth® devices supporting this feature
    • Music Streaming: No
      This device cannot stream music

  • Speakers

    • Frequency Response: Narrowband
      Speakers with a narrowband frequency response are capable of producing sound in a range well suited for traditional analog phone lines
    • Digital Signal Processing: No
      This device does not utilize DSP (Digital Signal Processing)

  • Microphone

    • Microphone Type: Omni Directional/noise filter
      Enhances call clarity by eliminating background noise from the office.
    • Microphone Sensitivity: Standard (E-STD)
      Standard (STD) variation microphone sensitivity is comparable to a normal telephone receiver and is used in most telephone devices.
    • Mute function: No
      There is no option to "mute/unmute" a conversation directly from the device

  • Battery & Power

    • Talk Time: Up to 6 hours
      Talk Time is the maximum time you can talk before a device runs out of power
    • Standby Time: Up to 192 hour(s)
      Standby Time is the maximum time a device can remain powered on
    • USB Charging: Yes
      USB Charging enables a device to be charged via a USB cable
    • Battery Status Indicator:
      • A battery status indicator reveals the remaining battery time
      • Charge alert

  • Design

    • Wearing Style: In the ear
      In the ear devices are worn in the ear
    • Weight: 8.4 grams
      How much the product weighs (in grams)
    • Length: 54mm
      The length of the product in millimeters
    • Width: 16mm
      The width of the product in millimeters
    • Depth: 24mm
      The depth of the product in millimeters

  • Remote Call Control

    • Digital Signal Processing: No
      This device does not utilize DSP (Digital Signal Processing)

  • Control

    • Vibrator: No
      There is no vibration function on this device
Was this useful?
Yes No

Thank you for your feedback

The information you provide will be used to improve the page.

We will not respond directly to your comments.

Please go to Contact if you need further assistance.

Thank you for your feedback

The information you provide will be used to improve the page.

Help Us Get Better

Please tell us why you didn't find this useful

How can we make this more useful for you?

Send Feedback Cancel
1. CHARGING YOUR HEADSETTake the AC adapter and plug its charging tip into the socket on the headset.

Plug the end of the AC adapter into a wall outlet.

The headset is fully charged and ready to use when the battery indicator on the StatusDisplay™ turns solid green. (Approx. 2 hours). The battery indicator stays solid green for 5 min. and then goes out.
VBT4050 01 Charging Your Headset
2. TURN YOUR HEADSET ON OR OFF To turn the headset on slide the ON/OFF button towards |.

To turn the headset off slide the ON/OFF button towards 0.
VBT4050 02 Turn Your Headset On Or Off
3. PAIRING YOUR HEADSET WITH YOUR MOBILE PHONEThe first time you turn your headset on, it automatically enters into pairing mode. The Bluetooth connection indicator on the StatusDisplay™ flashes blue.

For later pairing:
Make sure the headset is turned on

Press and hold the answer/end button for approximately 5 seconds.

The Bluetooth connection indicator on the StatusDisplay™ flashes blue when the headset is ready for pairing with your phone.

Set your Bluetooth phone to discover the headset. Follow your phone's instruction guide. This usually involves going to a "setup", "connect" or "Bluetooth" menu on your phone and selecting the option to discover or add a Bluetooth device.

Your phone will find the VBT4050.

Your phone then asks if you want to pair with it. Accept by pressing "yes" or "OK" on the phone. Your phone may ask for a pass key or PIN = 0000 (four zeros).

Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat the steps.

Pairing is successful when the Bluetooth connection indicator and the battery icon show solid light. The lights will stay solid for 5 seconds and then turn off.

If you are wearing the headset, the voice guidance will say "connected"
VBT4050 03 Pairing Your Headset With Your Mobile Phone
4. ACCEPTING A CALL ON THE HEADSETTap the Answer/End button on your headset to answer the call.
VBT4050 04 Accepting A Call On The Headset
5. ENDING A CALL ON THE HEADSETWhen you want to end a call, tap the Answer/End button on your headset.
VBT4050 05 Ending A Call On The Headset
6. TURNING VOLUME UP AND DOWN ON THE HEADSETTo increase volume: tap the button with the + symbol repeatedly until the desired volume is reached.

To decrease the volume: tap the button with the - symbol repeatedly until the desired volume is reached.
VBT4050 06 Turning Volume Up Or Down
7. ALWAYS KNOW YOUR STATUSYou can always get your connection and battery status on the StatusDisplay™ by tapping the volume-buttons.

Green battery icon: The headset is turned on and holds above 30 minutes talk time.

Red battery icon: The headset holds below 30 minutes talk time.

The headset has voice guidance. When the headset has less than 30 minutes talk time the voice guidance will say "low battery". The statement will be repeated every 10 minutes.

Solid icons: When the Bluetooth icon is solid, the headset is connected to your phone. (If the battery indication is lit but there is no Bluetooth indication, the headset is on but not connected to your phone).

When you do not have an active call, you can tap the answer/end button to hear "connected" statement. If your headset is not connected to any phone it will remain quiet.

Flashing Bluetooth icon: The headset is in pairing mode. In this state the headset can be paired (setup) to a new phone. Go to "pairing" in the menu for more information.
VBT4050 07 Always Know Your Status
8. MULTIUSE™ The headset pairs up to 8 devices. 2 at any given time. In order to use the headset with two phones/or a phone and a laptop you must "pair" both phones with the headset (go to the guide "pairing" to see how).

When both phones are paired to the VBT4050 simply turn on bluetooth on both devices and turn on the headset.

VBT4050 automatically switches to the receiving device when a call comes in and back again when the conversation is ended.
VBT4050 08 Multiuse
9. WEARING STYLESThe VBT4050 can be worn on either ear with or without an earhook.

When you open the packaging the first time you will find the headset fitted with a standard Jabra eargel and a S/M size earhook. If you find that the earhook is too small there is a size L in the pack that you can replace it with.

If you prefer to wear the headset without the earhook, we recommend that remove the earhook and replace the eargel with one of the two "Ultimate Comfort Eargel™" that are included in the pack.

With earhook
Gently wrap the earhook behind your ear and fit the speaker into the ear.

With Ultimate Comfort Eargel™
Fit the speaker in your ear.
VBT4050 09 Wearing Styles
Was this useful?
Yes No

Thank you for your feedback

The information you provide will be used to improve the page.

We will not respond directly to your comments.

Please go to Contact if you need further assistance.

Thank you for your feedback

The information you provide will be used to improve the page.

Help Us Get Better

Please tell us why you didn't find this useful

How can we make this more useful for you?

Send Feedback Cancel
Choose support area
Or go to Jabra VBT4050 support page
Frequently Asked Questions FAQ
Contact support Contact support
Was this useful?
Yes No

Thank you for your feedback

The information you provide will be used to improve the page.

We will not respond directly to your comments.

Please go to Contact if you need further assistance.

Thank you for your feedback

The information you provide will be used to improve the page.

Help Us Get Better

Please tell us why you didn't find this useful

How can we make this more useful for you?

Send Feedback Cancel