Requirements:

     +      +
GN 9350                           AZ-Adapter                          DE-EHS-001
GN 9330

open phone 63/65


Equipment:

Open Com 100 from software 5.2
Open Com 1000 from software 3.2


Connection:

Connect the 4-pinned RJ10 cable provided to the RJ10 jack marked "phone icon" marked jack on the base station of the GN9350 and the other end to the "Head set jack" of the A-Z adapter.

Now plug the 8-pinned RJ45 connector of DE-EHS-001connector cable into the socket marked "AUX" on the GN 9350 base station.

Connect the Hollow socket plug to the A-Z jack adapter marked "ring symbol" and the 6-pin West plug into the "second jack" of the A-Z adapter.


Setting software:

Set the GN 9350 in the LCD-display to "RHL" and press the OK button.




Setting base:

Set the telephone setup switch (A-G) to "A".




Setting transmission volume:

Set in the LCD-display the microphone volume to 7/12 and press the OK button.




Setting on open 63/65

Activate the function "Remote Headset" on your Open Phone set as follows.
Now type in the following key combination into your Open 63/65 phone:

> MENU > SETTING > PERIPHERAL > additional device-selection >
"REMOTE HEADSET"

Call acceptance on the Headset

As soon as the ringing tone signal is heard in the Headset, you can talk by pressing the silver colored button on the Headset, by re-pressing it the call is ended.