 |
Prerequisite:
9129-808-111
Tiptel 85
1) Plug the 1-sided end of the DHSG cable marked in blue into the socket of your phone marked with the "Headset symbol"
2)Plug the split end of the DHSG cable into the basestation of the GN 9350. The RJ10 plug is plugged into the socket with the complete "Telephone symbol" and the RJ45 is plugged into the socket marked as "AUX" of the GN 9350 basestation.
Software setting:
The GN 9120 must be set for DHSG software .
(the GN 9120 DHSG is always supplied in DHSG mode)
For control, Checking and setting can be carried out as follows:
Plug the headset into the basestation.
Then press the PLUS and MINUS button simultaneously for 6 seconds until the online display on the headset starts to flash.
Now the current software is displayed on the basestation.
The radio lamp displays the "RHL"; the MUTE-Lamp "DHSG" and the accumulator display displays "AEI".
With the aid of PLUS or MINUS button you can toggle between different kinds of software.
Installation of the software is confirmed when the device once again automatically changes over to the charge condition after 10 secs.
Base setting:
The adapter (small wheel) on the basestation must be positioned to "A".
Adjustment of the transmission volume:
Please make a call with the headset.
Now you must press the PLUS and MINUS button on the headset simultaneously, immediately after which a beep is heard. Now you can increase the microphone volume by pressing the PLUS button or decrease it by pressing the MINUS button.
This is confirmed by a slight beep heard after about 10 seconds. The settings are subsequently automatically saved.
|
|