Please select the Jabra Service you want to access.
Please enter your e-mail address below and we will send a new password to you.
We have sent you an email with your new password to .
Thank you for your feedback
If you need technical assistance, please click here for contact information
Tell us what you are experiencing
How can we make this more useful for you?
In this video we will demonstrate it with a Jabra PRO 9470, and Cisco Jabber for Windows client and show features like, answering and ending calls, putting calls on hold, and muting.
Video in English
Leatherette ear cushions provide better acoustic coupling between the ear and the headset. Since less sound escapes, the perceived volume is higher. To minimize the loss of volume, foam ear cushions are made of a special closed-cell foam, which helps improve acoustic coupling. Leatherette ear cushions provide approximately 6 dB extra output.
The availability of both leatherette and foam ear cushions is dependent on the model/style/design of corded headset you are using.
Yes. Make sure you have minimum firmware 2.9.0 or higher installed. With this version of firmware, the current receive volume level will be stored in the headset as the new default volume level.
The Jabra GN2000 Series is compatible with Jabra amplifiers such as Jabra GN1200, Jabra GN1210, Jabra GN1215, Jabra GN1216, Jabra GN1220, Jabra GN8000, Jabra GN8050 and Jabra GN8210 using the standard Jabra QD (Quick Disconnect) interface.
Yes, it is safe to use Jabra headsets. All Jabra headsets feature PeakStop™ technology, which protects against sudden loud sound spikes. Many acoustic experts define acoustic shock as being exposed to a sound of over 135 dBSPL, but even lower sounds can damage the hearing. Therefore all Jabra headsets cut off sounds at 118 dBSPL (RMS).
A noise canceling microphone filters out unwanted background noise. It does so by differentiating between sounds that come from nearby sources, such as from the mouth, and those from far away, which are then eliminated. Because of this, it is important that you position the noise canceling microphone close to your mouth, no further away than 2 finger widths.
It is possible to receive calls on either or both softphones, but to place a new call you need to select a preferred softphone. You can do this with Jabra PC Suite:
Please follow these steps:
1. Open Cisco Jabber
2. Click on File and choose Options
3. Click on Audio
4. Set the Jabra headset as the default audio device for Speaker, Microphone and Ringer/Alerts.
5. Click Apply and OK
1. Open Jabra PC Suite.
2. Click on the softphone tab
3. Under Target softphone for outgoing calls, select the desired softphone.
4. Click Apply and then OK
To get full call control you must have the latest version of Jabra PC Suite installed.
Download and install Jabra PC Suite
2. Click on the Softphone (PC) tab.
3. Make sure your screen is in Advanced View.
4. Select the appropriate softphone from the list under Target Softphone for Outoing Calls.
5. Click Apply.
3. Under softphone/vendor name choose the softphone that applies to you.
Firmware updates usually improve performance and sometimes add new functionalities to your device. To update the firmware:
Launch Jabra Firmware Updater installed with Jabra PC Suite, and follow the Firmware Updater wizard.
You can also check for updates via Jabra Control Center > Help > Check for Updates.
The microphone boom arm is designed to rotate only 270 degrees to protect the parts inside for optimal lifetime longevity. The 270 degree movement can be done in both directions, supporting left and right wearing styles. For 360 degree rotation please select the Jabra BIZ 2400 Series.
New features and enhancements:
System requirements & Compatibility:
See Jabra Suite for Mac Datasheet
Improved integration for:
System requirements & Compatibility:
See help file in JPCS or Installation guide: http://www.jabra.com/pcsuite