How to connect my Jabra Pro 9400 / Go 6470 with Siemens OpenStage 30,40,60,80
Prerequisite:
Jabra Pro 9460 / Jabra Pro 9470 + Jabra Link 14201-10
In combination with one of the following phones:
- Siemens OpenStage 30/40/60/80
Connection:
- Plug the 1-sided end of the DHSG cable marked blue into the phone socket marked with a "headset" symbol.
- Plug the RJ10 plug of the DHSG cable into the headset base socket marked with a “phone” symbol and the RJ45 plug into the socket marked with "AUX".
Then follow the instructions of the Jabra Pro 9400 / Jabra Go 6470 base SmartSetup Wizard.
Select phone settings, "Desk phone", then "Connect to a desk phone?”, "Manual".
Select adapter type "DHSG"
Base setup:
Set the phone setup switch to position "A".
Microphone volume setting:
We recommend setting the microphone volume to 6 out of 13.
Guided set-up:
As part of the installation you can dial into the local Jabra Setup server that takes care of configuring the audio path. Please follow the instructions shown on the display. If your Jabra Setup server is unavailable, please contact your local Jabra Support team.
Phone setup:
Important: For the equipment software 3.18 the headset operation must be set up additionally on the phone.
OpenStage 30/40: Menu> Audio Accessories> Headset> Cordless
OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless
Important: The dial tone signal in the headset is transmitted only if the standard ringtones are used. No ringtone is transmitted for mp3 ringtones.
