How to connect my Jabra Pro 9450 with Aastra Office 70 and 80 or Aastra 5370 and 5380

Prerequisite:

Jabra Pro 9450 + Jabra Link 14201-10

In combination with one of the following phones:

• Office 70 / 70 IP or 5370 IP
• Office 80 / 80 IP or 5380 IP

 

Connection:

1. Plug the 1-sided end of the DHSG cable marked in blue into the socket of your phone marked with the “headset” symbol.
2. Insert the RJ10 plug into the socket identified with the “phone” symbol and the RJ45 plug into the socket identified with "AUX" on the base.

You now have the option of setting up the headset on your phone via the automatic or manual configuration.

 

Automatic configuration:

To start the automatic configuration, have someone make a call to this phone and wait at least 10 seconds before taking the call. The appropriate EHS mode should now be installed.

If the automatic configuration has not worked, please select DHSG mode manually.

 

Base setup:

Set the phone set-up switch to position "A".

 

 

Microphone level setup:

Remove the cover from the base of the Jabra Pro 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quiet to the person you are calling, please use the volume adjuster until you achieve the optimum volume level.

 

 

Phone setup:

Menu > Settings > Phone settings > Headset > Headset ON

from release 7.9: Menu > Settings > Audio > Headset > Headset ON?