FAQ
How do I connect my Jabra wireless headset with the Jabra Link 14201-35 to my Avaya desk phone so I have remote call control using my headset?
How do I connect my Jabra wireless headset with the Jabra Link 14201-35 to my Avaya desk phone so I have remote call control using my headset?
Connection
- Disconnect the network cable of the phone.
- Connect the AC adapter that is supplied with the headset to the headset base. Connect the other end to an electrical outlet.
- Connect the modular plug cable that is supplied with the headset to the Jabra Link 14201-35 EHS Adapter in the socket marked with a phone icon. Connect the cable end with the blue band to the headset base socket that is marked with a phone icon.
- Connect the Jabra Link 14201-35 EHS Adapter cable end with the white band to the Jabra Link 14201-35 EHS Adapter port marked with a white handset/headset icon. Connect the other end to the headset interface on the Avaya phone.
- Connect the Jabra Link 14201-35 EHS 2.5mm ring sensor to the Jabra Link 14201-35 EHS adapter in the bell socket. Position the circular ring sensor over the speaker of the desk phone.
- Connect the Jabra Link 14201-35 EHS cable with the red band to the AUX interface on the headset base. Connect the other end to the AUX interface on the Jabra Link 14201-35 EHS.
- Ensure the EHS headset function on the desk phone is enabled.
- Follow the setup instructions for your Jabra wireless headset. If the headset base requires manual configuration, set the Electronic Hook Switch setting to “DHSG” and set the dial tone switch to position “A”.
- Make a call to the headset. If the volume of your voice is too loud or quiet to the person you are calling, adjust the headset microphone volume until you achieve the optimum level.
