QUESTIONS FRÉQUEMMENT POSÉES
How do I connect my Jabra wireless headset with the Jabra Link 14201-36 to my Alcatel desk phone so I have remote call control using my headset?
How do I connect my Jabra wireless headset with the Jabra Link 14201-36 to my Alcatel desk phone so I have remote call control using my headset?
Connection
Configuration
- Connect the AC adapter that is supplied with the headset to the headset base. Connect the other end to an electrical outlet.
- Connect the Jabra Link 14201-36 EHS double-ended cable (red band) to the AUX interface on the headset base. Connect the modular jack plug with the blue band to the headset base socket that is marked with a phone icon.
- Connect the Jabra Link 14201-36 EHS cable 3.5mm phone connector into the headset interface on the desk phone.
- Connect the Jabra Link 14201-36 EHS cable RJ12 connector into the socket by the bell icon on the desk phone. The remaining socket on the Jabra Link 14201-36 EHS cable remains empty.
Configuration
- Ensure the headset function on the desk phone is enabled.
- Follow the setup instructions for your Jabra wireless headset. If the headset base requires manual configuration, set the Electronic Hook Switch setting to “MSH” and set the dial tone switch to position “A”.
- Make a call to the headset. If the volume of your voice is too loud or quiet to the person you are calling, adjust the headset microphone volume until you achieve the optimum level.
