Jabra LINK 14201-10

Item no: 14201-10

Remote call control for a wide range of phone models with DHSG support

Jabra LINK 14201-10 enables remote Electronic Hook Switch Control (EHS) with Jabra wireless headsets and a wide range of phone models from Aastra, Agfeo, Auerswald, Funkwerk, Innovaphone, Siemens, Snom, Swyk, Deutsche Telecom, Tiptel and Ipitomy (see Jabra compatibility overview or consult your Jabra sales contact for the right solution).
Once installed, employees can control their call directly from their Jabra wireless headset up to 450 ft away from their desk.

Specifications:

  • Hear ring tone in headset
  • Answer and end calls
  • Adjust the volume
  • Mute the microphone


 

Was this useful?
Yes No

Thank you for your feedback

The information you provide will be used to improve the page.

We will not respond directly to your comments.

Please go to Contact if you need further assistance.

Thank you for your feedback

The information you provide will be used to improve the page.

Help Us Get Better

Please tell us why you didn't find this useful

How can we make this more useful for you?

Send Feedback Cancel

There are no accessories currently available for this product.

Specifications

  • Connectivity

    • Bluetooth version: N/A
      The highest supported Bluetooth® version
    • Usage: Desk phone
      Works with traditional desk phones
    • Jabra PC Suite: No
      This device does not have Jabra PC Suite

  • Remote Call Control

    • Jabra PC Suite: No
      This device does not have Jabra PC Suite

FAQ

  • Installation

    • How do I connect my Jabra GN9120 headset to a Snom 820 series telephone?

      The ​Jabra GN9120 headset can be connected to a Snom 820 series telephone using an Electronic Hook Switch cable (Jabra product no. 14201-10).

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9330e with Siemens OpenStage 30, 40, 60, 80

      Prerequisite:

      Jabra GN9330e + Jabra LINK 14201-10

      In combination with one of the following phones:

      • OpenScape 30 / 40 / 60 / 80

      Important:

      Please note that Remote Call Control is only supported by the Jabra GN9330e from version "L" or from date code 9/09.

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket marked with a “ headset” symbol on your phone.
      2.  Plug the RJ9 plug into the socket with the “phone” symbol and the RJ45 plug into the socket on the Jabra GN9330e base marked with "AUX".


      EHS setup:

      1. Place the headset on the base and activate “ DHSG” mode.
      2. Hold down the “phone” button on the base of the Jabra GN9330e for approx. 6 seconds until the online display (blue LED) on the headset starts to flash. The current EHS is displayed to you by activating the speaker controller in the form of the charge display (green LED).


      LEDs from left to right:

      LED 1 = RHL
      LED 2 = DHSG
      LED 3 = AEI
      LED 4 = MSH

      Thereafter, you can switch into the different EHS modes (LED 1-4) with the “ volume” controller on the headset. To confirm the EHS has successfully installed, the base automatically switches back to charge mode after approx. 15 seconds.

      Base setup:

      Set the phone set-up switch (A-G) to " A".




      Answer/end calls on the headset:

      Once the dial tone signal can be heard in the headset, you can answer the call by pressing the " Answer/end" button on the headset, while pressing it again will end the call.




      Phone setup:

      Important: For equipment EHS 3.18, the headset operation must be set up additionally at the phone.

      OpenStage 40: Menu > Audio accessories > Headset > Cordless

      OpenStage 60/80: Menu > User > Audio > Settings > Headset > Cordless

      Important: The dial tone signal in the headset is transmitted only if the standard ring tones are used on your phone. There is no dial tone signal transfer for mp3 ring tones.

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9330e with Siemens Opti Point 410, 420, 500, 600

      Prerequisite:

      Jabra GN9350 + Jabra LINK 14201-10 + Acoustic-Adapter (only available from Siemens)

      In combination with one of the following phones:

      • Opti Point 410 standard / advance
      • Opti Point 420 standard / advance
      • Opti Point 500 basic / standard / advance
      • Opti Point 600

       + Opti Point Acoustic Adapter:

      • min. Version number for: S30817-K7110-B508 -10
      • min. Version number for: S30817-K7110-N508 -1

       + HiPath phone system:

      • HiPath 500 from V.5
      • HiPath 1220 from V2.1 Build 032
      • HiPath 2000 from V1.0
      • HiPath 3000 from V3 SMR 14
      • HiPath 3000 from V4 SMR 7
      • HiPath 4000 from V1

       

      Important: If any of the components are missing remote call control will not work.

       

      Connection:

      Important: Please note that remote call control for the Jabra GN9330e is only supported from version "L" or Date code 9/09.

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of the OptiPoint Acoustic Adapter marked with the “headset” symbol.
      2. Insert the split end of the DHSG cable into the Jabra GN9330e base. Plug the RJ9 plug into the socket marked with a “phone” symbol and the RJ45 plug into the socket on the Jabra GN9330e marked "AUX".

       

      Software setup:

      Put the headset into the base and activate the “DHSG” mode.

      Hold down the “phone” button on the base of the Jabra GN9330e for approx. 6 seconds until the online display (blue LED) on the headset starts to flash. The current software is displayed to you by activating the volume controller in the form of the charge display (green LED).

      LEDs from left to right:

      LED 1 = RHL
      LED 2 = DHSG
      LED 3 = AEI
      LED 4 = MSH

      Thereafter, you can switch into the different software modes (LED 1-4) with the “volume” controller on the headset. To confirm the software has successfully installed, the base automatically switches back to charge mode after approx. 15 seconds.

       

      Base setup:

      Set the phone setup switch (A-G) to "A".

       

       

       

      Microphone level setup:

      Please call someone with the headset.

      If the other party cannot hear you well or just faintly, activate the volume controller at the base until you can be understood clearly.

       

      Phone setup:

      Important: As soon as the headset is connected + setup, a reset must be performed on the OptiPoint, for the EHS function to activate.

      An optional headset button can be installed over the phone menu (combination: *91 > Select Button > Change Button > Headset > OK).

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the ”answer/end” on the headset; by pressing again the call is ended.

       

       

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9350e with Siemens Opti Point 410, 420, 500, 600

      Prerequisite:

      Jabra GN9350 + Jabra LINK 14201-10 + Acoustic-Adapter (only available from Siemens)

      In combination with one of the following phones:

      • OptiPoint 410 standard / advance
      • OptiPoint 420 standard / advance
      • OptiPoint 500 basic / standard / advance
      • OptiPoint 600

      + OptiPoint Acoustic Adapter:

      • min. Version number for: S30817-K7110-B508 -10
      • min. Version number for: S30817-K7110-N508 -1

      + HiPath phone system:

      • HiPath 500 from V.5
      • HiPath 1220 from V2.1 Build 032
      • HiPath 2000 from V1.0
      • HiPath 3000 from V3 SMR 14
      • HiPath 3000 from V4 SMR 7
      • HiPath 4000 from V1

      Important: If any of the components are missing the remote call control will not work.

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of the OptiPoint Acoustic Adapter marked with the “headset” symbol.
      2. Insert the RJ9 plug into the socket marked with a “phone” symbol and the RJ45 plug into the base socket of the Jabra GN9350 marked with "AUX".

       

      Software setup:

      In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK button.

       

       

      Base setup:

      Set the phone setup switch (A-G) to "A".

       

      Microphone level setup:

      We recommend setting the microphone volume in the LCD display to 7 out of 12.

       


      Phone setup:

      Important: As soon as the headset is connected + setup, a reset must be performed on the OptiPoint, for the EHS function to activate.

      An optional headset button can be installed over the phone menu (combination: *91 > Select Button > Change Button > Headset > OK).

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the ”answer/end” button on the headset; by pressing again the call is ended.

       


      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9350e with Aastra Open Phone 6771, 6773, 6775, 71, 73, 75, Aastra 6739i, Aastra 7434 and 7444

      Prerequisite:

      Jabra GN9350 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Open Phone 6771/ 6773/ 6775 including IP (previous name: Open Phone 71/73/75 including IP)
      • Aastra 6739i
      • Aastra 7434 / 7444 IP

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked “blue” into the socket of your phone marked with the “headset” symbol.
      2. Plug the RJ9 plug into the socket marked with a complete “phone” symbol and the RJ45 plug into the base socket of the Jabra GN9350 marked with "AUX".

       

      Software setup:

       In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK button.

       

       

      Base setup:

      Set the phone setup switch (A-G) to "A".

       

      Microphone level setup:

      We recommend setting the microphone volume in the LCD display to 7 out of 12.

       

       

      Phone setup:

      Open Phone 71 Menu > User> Settings > Audio > Headset ON

      Open Phone 73 / 75 including IP: Menu > Overall Menu> Phone Settings > Headset ON

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the ”answer/end” button on the headset; by pressing again the call is ended.

       

       

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 920 with Aastra 6753i, 6755i, 6757i

      Prerequisite:

      Jabra PRO 920 + Jabra LINK 14201-10 + Aastra DHSG Cable Kit (only available from Aastra)

      In combination with one of the following phones:

      • Aastra 53i / 55i / 57i / 57iCT
      • Aastra 6753i / 6755i / 6757i / 6757i CT

      from phone firmware 2.5.1.2000 and higher

      Connection:

      Aastra DHSG cable:

      Insert the split end of the Aastra DHSG cable into your headset as follows.

       

      1. Insert the RJ9 plug (marked green) into the “headset” socket and the RJ45 plug (marked yellow) into the socket for the expansion module/ expansion modules.
      2. Plug the 1-sided end of the Aastra DHSG cable marked in blue into the RJ45 adapter.

      GN Netcom DHSG cable:


      1. Now plug the 1-sided end of the GN Netcom DHSG-cable marked in blue into the RJ45 free socket of the RJ45 adapter.
      2. Connect the split end of the DHSG cable with the Jabra PRO 920 base as follows. Plug the RJ9 plug into the socket marked with a complete “phone” symbol and the RJ45 plug into the base socket of the Jabra PRO 920 marked with "AUX".

      Now you can setup the headset for your phone with the automatic or manual configuration.

       

      Automatic configuration:

      To start the automatic configuration, please let someone call you on this phone; wait at least 10 seconds before you pick up the phone. Now the appropriate EHS mode should be set up.

      If the automatic configuration did not work, please manually select the DHSG mode. (See Manual).

       

      Base setup:


      Set the phone setup switch to position "A".

       

      Microphone volume setting:



      Put on the headset and call a colleague, for example.
      Now you can select the desired microphone volume using the +/- button.

      In version 2.5.1.2000 DHSG mode is disabled by default and must be activated via the Aastra.cfg or mac.cfg with the dhsg:1 command.

      From version 2.5.2 Options> Preferences> Audio Settings> DHSG > On

      The audio mode in the phone settings must be set to "Headphone/Speaker":

      Options> Preferences> Audio Settings> Audio Mode> Heads. / Speaker.

      Remote call control in combination with an expansion keypad is not supported.

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 920 with Aastra Office 70 and 80 or Aastra 5370 and 5380

      Prerequisite:

      Jabra PRO 920 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Office 70 / 70 IP or 5370 IP
      • Office 80 / 80 IP or 5380 IP

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of the phone marked with a “headset” symbol.
      2. Plug the other end of the cable into the sockets marked with a “phone” and "AUX".

      Now you can setup the headset for your phone with the automatic or manual configuration.

       

      Automatic configuration:

      To start the automatic configuration, please let someone call you on this phone; wait at least 10 seconds before you pick up the phone. Now the appropriate EHS mode should be set up.

      If the automatic configuration does not work, please manually select the DHSG mode. (See manual)


      Base setup:

      Set the phone setup switch to the "A" position.

       

      Microphone level setting:


      Put on the headset and call a colleague, for example.
      Now you can select the desired microphone volume using the +/- button.

       

      Phone setup:

      Menu> Settings> Phone Settings> Headset> Headset ON

      from Release 7.9: Menu> Settings> Audio> Headset> Headset ON

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 920 with Aastra Open Phone 6771, 6773, 6775,71,73, 75, Aastra 6739i, Aastra 7434 and 7444

      Prerequisite:

      Jabra PRO 920 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Open Phone 6771 / 6773 / 6775 including IP (previous name: Open Phone 71/73/75 including IP)
      • Aastra 6739i
      • Aastra 7434 / 7444 IP

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of the phone marked with a “headset” symbol.
      2. Plug the other end of the cable into the sockets marked with a “phone” and "AUX".

      Now you can setup the headset for your phone with the automatic or manual configuration.

       

      Automatic configuration:

      To start the automatic configuration, please let someone call you on this phone; wait at least 10 seconds before you pick up the phone. Now the appropriate EHS mode should be set up.

      If the automatic configuration does not work, please select the DHSG mode manually. 

       

      Base setup :

      Set the phone setup switch to position "A".

       

      Microphone volume setting:

      Put on the headset and call a colleague, for example. Now you can select the desired microphone volume using the +/- button.

       

      Phone setup:

      6771 / old Open Phone 71 > User> Settings > Audio > Headset ON

      6773 / 6775 / old Open Phone 73 / 75 including IP: Menu > Overall menu> Phone Settings > Headset ON

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 9400 / GO 6470 with Siemens OpenStage 30,40,60,80

      Prerequisite:

      Jabra PRO 9460 / Jabra PRO 9470 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Siemens OpenStage 30/40/60/80

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked blue into the phone socket marked with a "headset" symbol.
      2. Plug the RJ9 plug of the DHSG cable into the headset base socket marked with a “phone” symbol and the RJ45 plug into the socket marked with "AUX".

      Then follow the instructions of the Jabra PRO 9400 / Jabra GO 6470 base SmartSetup Wizard.

          

      Select phone settings, "Desk phone", then "Connect to a desk phone?”, "Manual".

      Select adapter type "DHSG"

       

      Base setup:


      Set the phone setup switch to position "A".

       

      Microphone volume setting:


      We recommend setting the microphone volume to 6 out of 13.

      Guided set-up:

      As part of the installation you can dial into the local Jabra Setup server that takes care of configuring the audio path. Please follow the instructions shown on the display. If your Jabra Setup Server is unavailable, please contact your local Jabra Support team.

       

      Phone setup:

      Important: For the equipment software 3.18 the headset operation must be set up additionally on the phone.

      OpenStage 30/40: Menu> Audio Accessories> Headset> Cordless

      OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless

      Important: The dial tone signal in the headset is transmitted only if the standard ringtones are used. No ringtone is transmitted for mp3 ringtones. ​​

       

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 9400 / GO 6470 with Siemens Opti Point 410, 420, 500, 600

      Prerequisite:

      Jabra PRO 9460 / Jabra PRO 9470 + Jabra LINK 14201-10 + Acoustic Adapter

      In combination with one of the following phones: 

      • Opti Point 410 standard / advance
      • Opti Point 420 standard / advance
      • Opti Point 500 basic / standard / advance
      • Opti Point 600

      + Opti Point Acoustic Adapter:

      • min. Version number for: S30817-K7110-B508 -10
      • min. Version number for: S30817-K7110-N508 -1

      + HiPath phone system:

      • HiPath 500 from V.5
      • HiPath 1220 from V2.1 Build 032
      • HiPath 2000 from V1.0
      • HiPath 3000 from V3 SMR 14
      • HiPath 3000 from V4 SMR 7
      • HiPath 4000 from V1

      Important: If any of the components are missing the Remote Call Control will not work.

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked in blue into the socket of the OptiPoint Acoustic Adapter marked with the "headset" symbol.
      2. Connect the split end of the DHSG cable with the Jabra PRO 9400 base as follows. Plug the RJ9 plug into the socket marked with a “phone” symbol and the RJ45 plug into the base socket marked with "AUX".

      Then follow the instructions of the Jabra PRO 9400 base SmartSetup Wizard.

          

      Select phone settings, "Desk phone", then "Connect to a desk phone?”, "Manual".

       

      Select adapter type "Siemens OptiPoint"

       

      Base setup:


      Set the phone setup switch to position "A".

       

      Microphone volume setting:

       

      We recommend setting the microphone volume to 6 out of 13.

       

      Guided set-up:

      As part of the installation you can dial into the local Jabra Setup server that takes care of configuring the audio path. Please follow the instructions shown on the display. If your Jabra Setup Server is unavailable, please contact your local Jabra Support team.

       

      Phone setup:

      Important: As soon as the headset is connected and set up, a reset must be performed on the OptiPoint, for the EHS function to activate.

      An optional headset button can be installed in the phone menu (combination: *91>select button > change button > headset > OK). ​​

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 9450 with Siemens OpenStage 30, 40, 60, 80

      Prerequisite:

      Jabra PRO 9450 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • OpenStage 30 / 40 / 60 / 80

      Full function from EHS version 1.40 (repeated dial tone signal).

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked “blue” into the socket of your phone marked with the “headset” symbol.
      2. Insert the RJ9 plug into the socket marked with the “phone” symbol and the RJ45 plug into the socket marked with "AUX" on the base.

      You now have the option of setting up the headset on your phone via the automatic or manual configuration.

       

      Automatic configuration:

      To start the automatic configuration, have someone call this phone and wait at least 10 seconds before taking the call. The appropriate EHS mode should now be installed.

      If the automatic configuration has not worked, please select DHSG mode manually.

       

      Base setup:

      Set the phone set-up switch to position "A".

       

       

       

      Microphone level setup:

      Remove the cover from the base of the Jabra PRO 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quiet to the person you are calling, please use the volume adjuster until you achieve the desired volume level.

       

      Phone setup:

      Important: With the equipment EHS 3.18, the headset operation on the phone must also be set up.

      Menu > User > Audio > Settings > Headset > Cordless > OK

      Important: The dial tone signal in the headset will only transfer when the standard ring tones are used on your phone. There is no ring tone signal transfer with mp3.

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 9450 with Siemens Opti Point 410, 420, 500, 600

      Prerequisite:

      Jabra PRO 9450 + Jabra LINK 14201-10 + Acoustic Adapter (only available from Siemens)

      In combination with one of the following phones:

      • Opti Point 410 standard / advance
      • Opti Point 420 standard / advance
      • Opti Point 500 basic / standard / advance
      • Opti Point 600

      + Opti Point acoustic adapter:

      • min. version number for: S30817-K7110-B508 -10
      • min. version number for: S30817-K7110-N508 -1

      + HiPath phone system:

      • HiPath 500 from V.5
      • HiPath 1220 from V2.1 build 032
      • HiPath 2000 from V1.0
      • HiPath 3000 from V3 SMR 14
      • HiPath 3000 from V4 SMR 7
      • HiPath 4000 from V1

      Important: If one of the components is missing the remote call control will not work.

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked "blue" into the socket of the universal adapter marked with the “headset” symbol
      2. Insert the RJ9 plug into the socket marked with the “phone” symbol and the RJ45 plug into the socket marked with "AUX" on the base

        

      Manual configuration:

      The appropriate EHS mode should now be installed, to do this select Siemens Optipoint mode as described.

        

      Base setup:

      Set the phone set-up switch to position "A".

       

      Microphone level setup:

      Remove the cover from the base of the Jabra PRO 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quiet to the person you are calling, press the volume adjuster until you achieve the optimum volume level.

       


       

      Phone setup:

      Important: Once the headset has been connected and set, a reset must be implemented on the OptiPoint phone so that the EHS function is accepted.

      An optional headset button can be set up via the phone menu (combination: *91 >Select button > Change button > Headset > OK).

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 9450 with Aastra 6753i, 6755i, 6757i

      Prerequisite:

      Jabra PRO 9450 + Jabra LINK 14201-10 + Aastra DHSG cable kit (only available from Aastra)

      In combination with one of the following phones:

      • Aastra 53i / 55i / 57i / 57iCT
      • Aastra 6753i / 6755i / 6757i / 6757i CT
      • From phone firmware 2.5.1.2000 or higher.

       

      Connection:

      Aastra DHSG cable:

       
      1. Insert the split end of the Aastra DHSG cable into your phone as follows.
      2. Insert the RJ9 plug (marked green) into the “headset” socket and the RJ45 plug (marked yellow) into the socket for the expansion module.
      3. Insert the 1-sided end of the Aastra cable marked in blue into the RJ45 adapter.

       

      GN Netcom DHSG cable:


      1. Now insert the 1-sided end of the GN Netcom DHSG cable marked in blue into the free socket of the RJ45 adapter.
      2. Connect the split end of the DHSG cable as follows with the Jabra PRO 94x0e base. Insert the RJ9 plug into the socket identified with the complete “phone” symbol and the RJ45 plug into the socket identified with "AUX" on the Jabra PRO 94x0 base.

      You now have the option of setting up the headset on your phone via the automatic or manual configuration.

       

      Automatic configuration:

      To start the automatic configuration, have someone call you on this phone and wait at least 10 seconds before taking the call. The appropriate EHS mode should now be installed.

      If the automatic configuration has not worked, please select DHSG mode manually.

       

      Base setup:

      Set the phone set-up switch to position "A".

       

       

      Microphone level setup:

      Remove the cover from the base of the Jabra PRO 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quiet to the person you are calling, please use the volume adjuster until you achieve the optimum volume level.

       

       

      Phone setup:

      With the version 2.5.1.2000, the DHSG mode is deactivated by default and must be activated via the Aastra.cfg or mac.cfg with the command dhsg: 1.

      From version 2.5.2 Options > Default settings > Audio settings > DHSG > On

      Audio mode in the phone settings must be set to “Headset / Speaker”:

      Options > Default settings > Audio settings > Audio mode > Headset / Speaker

       

      Remote call control in combination with an expansion keypad is not supported.

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 9450 with Aastra Office 70 and 80 or Aastra 5370 and 5380

      Prerequisite:

      Jabra PRO 9450 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Office 70 / 70 IP or 5370 IP
      • Office 80 / 80 IP or 5380 IP

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked in blue into the socket of your phone marked with the “headset” symbol.
      2. Insert the RJ9 plug into the socket identified with the “phone” symbol and the RJ45 plug into the socket identified with "AUX" on the base.

      You now have the option of setting up the headset on your phone via the automatic or manual configuration.

       

      Automatic configuration:

      To start the automatic configuration, have someone make a call to this phone and wait at least 10 seconds before taking the call. The appropriate EHS mode should now be installed.

      If the automatic configuration has not worked, please select DHSG mode manually.

       

      Base setup:

      Set the phone set-up switch to position "A".

       

       

      Microphone level setup:

      Remove the cover from the base of the Jabra PRO 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quiet to the person you are calling, please use the volume adjuster until you achieve the optimum volume level.

       

       

      Phone setup:

      Menu > Settings > Phone settings > Headset > Headset ON

      from release 7.9: Menu > Settings > Audio > Headset > Headset ON?

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 9450 with Aastra Open Phone 6771, 6773, 6775, 71, 73, 75, Aastra 6739i, Aastra 7434 and 7444

      Prerequisite:

      Jabra PRO 9450 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Open Phone 6771 / 6773 / 6775 incl. IP (Old name: Open Phone 71/73/75 incl. IP)
      • Aastra 6739i
      • Aastra 7434 / 7444 IP

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked "blue" into the socket of your phone marked with the “headset” symbol.
      2. Insert the RJ9 plug into the socket identified with the “phone” symbol and the RJ45 plug into the socket identified with "AUX" on the base.

       

      Automatic configuration:

      You now have the option of setting up the headset on your phone via the automatic or manual configuration.

      To start the automatic configuration, have someone call you on this phone and wait at least 10 seconds before taking the call. The appropriate EHS mode should now be installed.

      If the automatic configuration has not worked, please select DHSG mode manually.

       

      Base setup:

      Set the phone setup switch to position "A".

      Microphone level setup:

      Remove the cover from the base of the Jabra PRO 9450 and make a call with the headset, to a colleague for example. If you are too loud or too quiet to the person you are calling, please use the volume adjuster until you achieve the optimum volume level.

       

       

      Phone setup:

      Open Phone 71 Menu > Settings > Audio > Headset ON

      Open Phone 73 / 75 incl. IP: Menu > Complete menu > Phone settings > Headset ON

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9350e with Siemens OpenStage 30, 40, 60, 80

      Prerequisite:

      Jabra GN9350 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • OpenStage 30/ 40 / 60 / 80

      Full function from software version 1.40 (multiple dial tone signal transfer)

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of your OpenStage phone marked with the “headset” symbol.
      2. Plug the RJ9 plug into the socket marked with a “phone” and the RJ45 plug into the base socket of the Jabra GN9350 marked with "AUX".

       

      Software setup:

      In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK button to confirm the software setting.

       

      Base setup:

      Set the phone setup switch to "A".

       

      Microphone level setup:

      We recommend setting the microphone volume in the LCD display to 7 out of 12.

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the "answer/end” button" on the headset; by pressing again the call is ended.

       

       

      Phone setup:

      Important: For equipment software 3.18, the headset operation must be set up additionally at the phone.

      OpenStage 40: Menu> Audio Accessories> Headset> Cordless

      OpenStage 60/80: Menu> User> Audio> Settings> Headset> Cordless

      Important: The dial tone signal in the headset is transmitted only if the standard ringtones are used. No ringtone is transmitted for mp3 ringtones.

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9330e with Aastra 6753i, 6755i, 6757i

      Prerequisite:

      Jabra GN9330e + Jabra LINK 14201-10 + Aastra DHSG Cable Kit (only available from Aastra)

      In combination with one of the following phones:

      • Aastra 53i / 55i / 57i / 57iCT
      • Aastra 6753i / 6755i / 6757i / 6757i CT

      From phone firmware 2.5.1.2000 or higher.

       

      Connection:

      Important: Please note that remote call control for the Jabra GN9330e is supported from version "L" or the Date code 9/09.

      Aastra DHSG cable:

       


      1. Insert the split end of the Aastra DHSG cable into your phone as follows. The RJ9 plug (marked green) into the “headset” socket and the RJ45 plug (marked yellow) into the socket for the expansion module/ expansion modules.

      2. Plug the 1-sided end of the Aastra DHSG cable marked in blue into the RJ45 adapter.

       

      GN Netcom DHSG cable:


      1. Now plug the 1-sided of the GN Netcom DHSG cable marked in blue into the free socket of the RJ45 adapter.
      2. Plug the RJ9 plug into the socket marked with a “phone” symbol and the RJ45 plug into the base socket of the Jabra GN9330e marked with "AUX".

       

      Software setup:

      Put the headset into the base and activate the “DHSG” mode.

      Hold down the “phone” button on the base of the Jabra GN9330e for approx. 6 seconds until the online display (blue LED) on the headset starts to flash. The current software is displayed to you by activating the volume controller in the form of the charge display (green LED).

      LEDs from left to right:

      LED 1 = RHL
      LED 2 = DHSG
      LED 3 = AEI
      LED 4 = MSH

      Thereafter, you can switch into the different software modes (LED 1-4) with the “volume” controller on the headset. To confirm the software has successfully installed, the base automatically switches back to charge mode after approx. 15 seconds.

       

      Base setup:

      Set the phone setup switch (A-G) to "A".

       

      Phone setup:

      In version 2.5.1.2000 the DHSG mode is disabled by default and must be activated via the Aastra.cfg or mac.cfg with the command dhsg:1.

      From version 2.5.2 Options> Preferences> Audio Settings> DHSG > On

      The audio mode must be set to "Headset/Speaker" in the phone settings: Options > Preferences > Audio Settings > Audio Mode > Headset/Speaker.

      Remote call control in combination with an expansion keypad is not supported!

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the ”answer/end” button on the headset; by pressing again the call is ended.

       

       

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9330e with Aastra Office 70 and 80 or Aastra 5370 and 5380

      Prerequisite:

      Jabra GN9330e + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Office 70 / 70 IP or 5370 IP
      • Office 80 / 80 IP or 5380 IP

       

      Connection:

      Important: Please note that remote call control for the Jabra GN9330e is only supported from version "L" or the Date code 9/09.

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of your phone marked with the “headset” symbol.
      2. Insert the split end of the DHSG cable into the Jabra GN9330e base. Plug the RJ9 plug into the socket marked with a  “phone” symbol and the RJ45 plug into the base socket of the Jabra GN9330e marked with "AUX".

       

      Software setup:

      Put the headset into the base and activate the "DHSG” mode.

      Hold down the “phone” button on the base of the Jabra GN9330e for approx. 6 seconds until the online display (blue LED) on the headset starts to flash. The current software is displayed to you by activating the volume controller in the form of the charge display (green LED).

      LEDs from left to right:

      LED 1 = RHL
      LED 2 = DHSG
      LED 3 = AEI
      LED 4 = MSH

      Thereafter, you can switch into the different software modes (LED 1-4) with the “volume” controller on the headset. To confirm the software has successfully installed, the base automatically switches back to charge mode after approx. 15 seconds.

       

      Base setup:

      Set the phone setup switch (A-G) to "A".

       

       

      Phone setup:

      Menu > User> Settings > Audio > Headset ON

      From Release 7.9: Menu> Settings> Audio> Headset> Headset ON

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the ”answer/end” on the headset; by pressing again the call is ended.

       

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9330e with Aastra Open Phone 6771, 6773, 6775, 71, 73, 75, Aastra 6739i, Aastra 7434 and 7444

      Prerequisite:

      Jabra GN9330e + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Open Phone 6771 / 6773 / 6775 including IP (previous name: Open Phone 71 /73 / 75 including IP)
      • Aastra 6739i
      • Aastra 7434 / 7444 IP

       

      Connection:

      Important: Please note that remote call control for the Jabra GN9330e is only supported from version "L" or the Date code 9/09.

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of your phone marked with the “headset” symbol.
      2. Insert the split end of the DHSG cable into the Jabra GN9330e base. Plug the RJ9 plug into the socket marked with a “phone” symbol and the RJ45 plug into the base socket of the Jabra GN9330e marked with "AUX".

       

      Software setup:

      Put the headset into the base and activate the “DHSG” mode.

      Hold down the “phone” button on the base of the Jabra GN9330e for approx. 6 seconds until the online display (blue LED) on the headset starts to flash. The current software is displayed to you by activating the volume controller in the form of the charge display (green LED).

      LEDs from left to right:

      LED 1 = RHL
      LED 2 = DHSG
      LED 3 = AEI
      LED 4 = MSH

      Thereafter, you can switch into the different software modes (LED 1-4) with the “volume” controller on the headset. To confirm the software has successfully installed, the base automatically switches back to charge mode after approx. 15 seconds.

       

      Base setup:

      Set the phone setup switch (A-G) to "A".

       

       

      Phone setup:

      Open Phone 71 Menu > User> Settings > Audio > Headset ON

      Open Phone 73 / 75 including IP: Menu > Overall Menu> Phone Settings > Headset ON

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the ”answer/end” button on the headset; by pressing again the call is ended.

       

       

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9350e with Aastra 6753i, 6755i, 6757i

      Prerequisite:

      Jabra GN9350 + Jabra LINK 14201-10 + DHSG connection cable (Aastra product no.: D0062-0011-34-00)

      In combination with one of the following phones:

      • Aastra 53i / 55i / 57 i / 57iCT
      • Aastra 6753i / 6755i / 6757i / 6757i CT

       from phone firmware 2.5.1.2000 and higher

        

      Connection:

      Aastra DHSG cable:


      1. Insert the split end of the Aastra DHSG cable into your phone as follows: RJ10 plug (marked green) into the “headset” socket and the RJ45 plug (marked yellow) into the socket for the expansion module/ expansion modules.
      2. Plug the 1-sided blue marked end of the Aastra DHSG cable into the RJ45 adapter.

       

      GN Netcom DHSG cable:


      1. Now plug the 1-sided blue end of the Jabra LINK 14201-10 cable into the free socket of the RJ45 adapter.
      2. Connect the split end of the DHSG cable with the Jabra GN9350 base as follows. Plug the RJ9 plug into the socket marked with a complete “phone” symbol and the RJ45 plug into the base socket of the Jabra GN9350 marked with "AUX".

       

      Software setup:

      In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK button.

       

       

      Base setup:

      Set the phone setup switch (A-G) to "A".

       

      Microphone level setup:

      We recommend setting the microphone volume in the LCD display to 7 out of 12.

       

      Phone setup:

      In version 2.5.1.2000 the DHSG mode is disabled by default and must be activated via the Aastra.cfg or mac.cfg with the command dhsg:1.

      From version 2.5.2 Options> Preferences > Audio Settings > DHSG > On

      The audio mode must be set to "Headset/Speaker" in the phone settings: Options > Preferences > Audio Settings > Audio Mode > Headset/Speaker

      Remote call control in combination with an expansion keypad is not supported.

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the ”answer/end” button on the headset; by pressing again the call is ended.

      ​

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra GN9350e with Aastra Office 70 and 80 or Aastra 5370 and 5380

      Prerequisite:

      Jabra GN9350 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Office 70 / 70 IP or 5370 IP
      • Office 80 / 80 IP or 5380 IP

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked in blue into the socket of your phone socket marked with the “headset” symbol.
      2. Plug the RJ9 plug into the socket marked with a “phone” and the RJ45 plug into the base socket of the Jabra GN9350 marked with "AUX".

       

      Software setup:

      In the LCD Display, set the Jabra GN9350 to "DHSG" and press the OK button.


      Base setup:

      Set the phone setup switch (A-G) to "A".

       

       

      Microphone level setup:

      We recommend setting the microphone volume in the LCD display to 7 out of 12.

       

      Phone setup:

      Menu> Settings> Phone Settings> Headset> Headset ON

      from Release 7.9: Menu> Settings> Audio> Headset> Headset ON

       

      Headset answer/end:

      As soon as the dial tone signal can be heard in the headset, you can answer the call by pressing the ”answer/end” button on the headset; by pressing again the call is ended.

       

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 920 with Siemens OpenStage 30, 40, 60, 80

      Prerequisite:

      Jabra PRO 920 + Jabra LINK 14201-10

      In combination with one of the following phones:

      • Siemens OpenStage 30/40/60/80

      full function from software version 1.40 (multiple dial tone signal transfer)

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of the phone marked with the “headset” symbol.
      2. Plug the RJ9 plug into the socket marked with the “phone” symbol and the RJ45 plug into the base socket marked with "AUX".

      Now you can setup the headset for your phone with the automatic or manual configuration.

       

      Automatic configuration:

      To start the automatic configuration, please let someone call you on this phone; wait at least 10 seconds before you pick up the phone. Now the appropriate EHS mode should be set up.

      If the automatic configuration did not work, please manually select the DHSG mode. See User Manual for instructions.

       

      Base setup:

       

      Set the phone setup switch to position "A".

       

      Microphone level setup:


      Put on the headset and call a colleague, for example.
      Now you can select the desired microphone volume using the +/- button.

       

      Phone setup:

      Important: For the equipment software 3.18, the headset operation must be set up additionally at the phone.

      Menu > User > Audio > Settings > Headset > Cordless > OK

       

      Important: The dial tone signal in the headset is transmitted only if the standard ringtones are used. There is no dial tone signal transfer for mp3.

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

    • How to connect my Jabra PRO 920 with Siemens Opti Point 410, 420, 500, 600

      Prerequisite:

      Jabra PRO 920 + Jabra LINK 14201-10 + Acoustic Adapter

      In combination with one of the following phones:

      • Opti Point 410 standard / advance
      • Opti Point 420 standard / advance
      • Opti Point 500 basic / standard / advance
      • Opti Point 600

       

      + Opti Point Acoustic Adapter:

      • min. Version number for: S30817-K7110-B508 -10
      • min. Version number for: S30817-K7110-N508 -1

       

      + HiPath phone system:

      • HiPath 500 from V.5
      • HiPath 1220 from V2.1 Build 032
      • HiPath 2000 from V1.0
      • HiPath 3000 from V3 SMR 14
      • HiPath 3000 from V4 SMR 7
      • HiPath 4000 from V1

       

      Important: If any of the components are missing fhe remote call control will not work.

       

      Connection:

      1. Plug the 1-sided end of the DHSG cable marked blue into the socket of the phone socket marked with the “headset” symbol.
      2. Connect the split end of the DHSG cable with the Jabra PRO 920 base as follows. Plug the RJ9 plug into the socket marked with the “phone” symbol and the RJ45 plug into the base socket marked with "AUX".

       

      Manual configuration:

      Now the appropriate EHS mode must be set up, to do so please select the Siemens OptiPoint mode as described. See User Manual for instructions.

       

      Base setup:

      Set the phone setup switch to position "A".

       

      Microphone volume setup:

      Put on the headset and call a colleague, for example.
      Now you can select the desired microphone volume using the +/- button.

       

      Phone setup:

      Important: As soon as the headset is connected + setup, a reset must be performed on the OptiPoint, for the EHS function to be taken over.

      An optional headset button can be installed over the phone menu (combination: *91>Select button > Change Button > Headset > OK).

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

  • Technologies

    • What is Electronic Hook Switch (EHS)?

      Electronic Hook Switch (EHS) provides a solution that enables remote operation, e.g. answer/end functions, of compatible Jabra wireless headsets with various phones, thus eliminating the need for a mechanical handset lifter.

      Was this useful?
      Yes No

      Thank you for your feedback

      The information you provide will be used to improve the page.

      We will not respond directly to your comments.

      Please go to Contact if you need further assistance.

      Thank you for your feedback

      The information you provide will be used to improve the page.

      Help Us Get Better

      Please tell us why you didn't find this useful

      How can we make this more useful for you?

      Send Feedback Cancel

No documentation available for this product

For more support to your product, drivers, Firmware, go to the product support page

Was this useful?
Yes No

Thank you for your feedback

The information you provide will be used to improve the page.

We will not respond directly to your comments.

Please go to Contact if you need further assistance.

Thank you for your feedback

The information you provide will be used to improve the page.

Help Us Get Better

Please tell us why you didn't find this useful

How can we make this more useful for you?

Send Feedback Cancel