The first time you turn your headset on, it automatically enters into pairing mode. The Bluetooth connection indicator on the StatusDisplay™ flashes blue.
For later pairing:
Make sure the headset is turned on
Press and hold the answer/end button for approximately 5 seconds.
The Bluetooth connection indicator on the StatusDisplay™ flashes blue when the headset is ready for pairing with your phone.
Set your Bluetooth phone to discover the Jabra EASYGO. Follow your phone's instruction guide or visit our bluetooth pairing guide
. This usually involves going to a "setup", "connect" or "Bluetooth" menu on your phone and selecting the option to discover or add a Bluetooth device.
Your phone will find the Jabra EASYGO.
Your phone then asks if you want to pair with it. Accept by pressing "yes" or "OK" on the phone. Your phone may ask for a pass key or PIN = 0000 (four zeros).
Your phone will confirm when pairing is complete. In case of unsuccessful pairing, repeat the steps.
Pairing is successful when the Bluetooth connection indicator and the battery icon show solid light. The lights will stay solid for 5 seconds and then turn off.
If you are wearing the headset, the voice guidance will say "connected"