• Superior sound for hands-free calls in the car
  • Pair it with 2 Bluetooth™-enabled devices (like your mobile and MP3 player)
  • Know who's calling and when it's time to recharge
  • Hear your calls clearly with its dual microphone technology
  • Just clip and go – no installation, no programs, no wires
  • Play your music and calls through the car stereo
  • Talk for hours (about 14 of them, to be precise) 
Cruiser2 mobile

Superior sound for hands-free calls

Enjoy crystal clear conversations in your car, while keeping your hands firmly planted on the steering wheel – all with the Jabra CRUISER2 Bluetooth™ in-car speakerphone.It tells you how to use itSay goodbye to manuals. Jabra CRUISER2 gives you simple, verbal instructions on how to pair it with your mobile phone. It lets you know when the battery is low and it even tells you who is calling.

You can take it anywhere

No installation necessary, just clip your Jabra CRUISER2 to the sun visor of the car, and go.


Like talking face-to-face

You don’t have to compromise call quality for safety. The speakerphone includes Noise Blackout technology and a dual microphone, which means you enjoy clear, understandable calls, without the annoying “speaker phone” sound.

Cruise to your favorite tunes

Listen to podcasts, GPS directions or wirelessly stream your playlist to the Jabra CRUISER2, or to your car’s stereo system, using the speakerphone’s FM transmitter and A2DP technology. 

Jabra CRUISER 2 close up of side controls
Was this useful?

Thank you for your feedback

Help Us Get Better

Please tell us why you didn't find this useful

Send Feedback Cancel

Technical Spec

  • Battery & Power

    • USB Charging: Yes
      USB Charging enables a device to be charged via a USB cable
    • Talk Time:
      • up to 14 hrs
    • Standby Time:
      • Up to 480 hour(s)
    • Music streaming time:
      • N/A
  • Connectivity

    • Connectivity:
      • This device can be connected via USB
    • Jabra PC Suite: No
      This device does not have Jabra PC Suite
    • Auto Pairing: Yes
      With Auto Pairing, a device pairs automatically with Bluetooth devices supporting this feature
    • Wireless Technology:
      • Supports Bluetooth for wireless connectivity
    • Music Streaming: Yes
      Device can stream music from a source, such as a Smartphone, Bluetooth enabled laptop, tablet, or MP3 player
  • Microphone

    • Microphone Sensitivity: High (E-HS)
      High (HS) microphone sensitivity is our microphone with the highest transmission volume; it is often used with telephones that have a very low output volume and can be connected directly to the phone, eliminating the need for an amplifier
    • Microphone Type: Dual Microphone (Noice Blackout™)
      Microphones with Noise Blackout™ have an aggressive noise filter coupled with two microphones utilizing Digital Signal Processing (DSP) software to remove noise
    • Mute function: Yes
      Mute gives you the option to mute/unmute the microphone directly on the device
  • Control

    • Battery Status Indicator:
      • A battery status indicator reveals the remaining battery time
    • Movement Sensors: No
      There is no Movement Sensor on this device
  • Speakers

    • Frequency Response:
      • Speakers with a narrowband frequency response are capable of producing sound in a range well suited for traditional analog phone lines
    • Digital Signal Processing: Yes
      Digital Signal Processing (DSP) is a technology that digitally optimizes your voice and music and suppresses echoes
  • Design

    • Changeable Covers: No
      This device does not support changeable covers
    • Wearing Style:
      • VisorClip
Was this useful?

Thank you for your feedback

Help Us Get Better

Please tell us why you didn't find this useful

Send Feedback Cancel
1. CHARGE YOUR SPEAKERPHONE USING A PC Do not use your speakerphone until it is fully charged.
Plug the USB cables' charging tip into the socket on the speakerphone.
Plug the other end of the USB cable into the USB port on a PC.
When the battery status icon turns solid green your speakerphone is fully charged (approx. 2 hours).
CRUISER2 01 Charging Using Power Outlet
2. CHARGE YOUR SPEAKERPHONE USING YOUR CAR'S POWER OUTLET Do not start using your headset until it is fully charged.
Plug the USB cable's charging tip into the socket on the speakerphone.
Plug the other end into the car charger and insert it into your car's power outlet.
When the battery status icon turns solid green your speakerphone is fully charged (approx. 2 hours).
CRUISER2 02 Charging Using Pc
3. PAIR YOUR SPEAKERPHONE WITH YOUR MOBILE PHONE The first time you turn your speakerphone on, it automatically enters pairing mode (the Bluetooth® icon will flash rapidly).

For later pairing:
Turn the speakerphone on and press the answer/end button for 5 seconds. Release the button when the Bluetooth® icon light flashes rapidly and you hear the voice announcement "pairing mode".

Your Jabra CRUISER has now entered into pairing mode and is ready for pairing with your mobile phone.

The speakerphone will give you further voice instructions.
Set your Bluetooth phone to discover the Jabra CRUISER. Follow your phone's instruction guide. This usually involves going to a "setup", "connect" or "Bluetooth" menu on your phone and selecting the option to discover or add a Bluetooth device.

Your phone will find the Jabra CRUISER.

Your phone then asks if you want to pair with it. Accept by pressing "yes" or "OK" on the phone and confirm with the passkey or PIN = 0000 (four zeros).

Your phone will confirm when pairing is complete. In case of unsuccesful pairing, repeat the steps.

When the Bluetooth® icon shows a solid blue light and you hear the voice announcement "Connected" your Jabra CRUISER is ready for use!
CRUISER2 03 Pairing
4. TURN YOUR SPEAKERPHONE ON Slide the on/off button to position on.

The Bluetooth® icon shows a solid light when your Jabra CRUISER is on and connected. The first time you turn your speakerphone on, it automatically enters pairing mode.
CRUISER2 04 Turn On
5. ACCEPTING A CALL ON YOUR SPEAKERPHONE The call status icon will blink blue when you have an incoming call.
(The name of the incoming caller is announced if phonebook access is supported by your phone. If not, only the number will be announced).

Tap the answer/end button to receive the call.
CRUISER2 06 Accept Call
6. ENDING A CALL ON YOUR SPEAKERPHONE Tap the answer/end button on your speakerphone to end an active call.
CRUISER2 07 End Call
7. TURNING VOLUME UP AND DOWN ON YOUR SPEAKERPHONE Tap the volume up/volume down button on the side of the Jabra CRUISER to adjust the volume level.
CRUISER2 08 Turning Volume Up Or Down

8. USING YOUR SPEAKERPHONE IN THE CAR

The Jabra CRUISER is designed to clip onto a car visor using the visor clip on the rear side of the product.

The Jabra CRUISER sits discreetly and conveniently on the sun visor.

For optimal sound quality place the Jabra CRUISER right in front of you and speak directly into the speakerphone.

CRUISER2 09 Using In Car
Was this useful?

Thank you for your feedback

Help Us Get Better

Please tell us why you didn't find this useful

Send Feedback Cancel

FAQ

  • Audio

    • I have trouble with the stereo (A2DP) functionality on my speakerphone.

      These functions are dependent on your phone supporting them. You may also simply need to reset the communication between your cell phone and the speakerphone. 

      Please try the following steps:

      1. Turn your cell phone off and remove its battery for 10 to 15 seconds.  Once you replace the battery and turn the cell phone back on, it should work again.
      2. To reset the Jabra speakerphone, simply insert a small object into the hole found on the back of the unit and hold it there for a few seconds.  When you turn the speakerphone back on, you will need to follow the pairing procedure again as pairing data is deleted during a reset.

      Please check your phone’s user manual for further details.

    • Why am I receiving static on my Bluetooth speakerphone?

      All wireless devices may be susceptible to interference, which could affect performance. Please try the following:

      1. Keep the headset on the same side of your body as the phone.
      2. Make sure there is a direct line of contact between the headset and your phone. The Bluetooth signal may have difficulty transmitting through walls, buildings or people. Static or interference is sometimes environmental. Interference can be caused by computers, cordless phones, microwaves etc.

    • I cannot hear anything in my speakerphone.

      Please try the following steps: 

      1. Increase the volume on the speakerphone.
      2. Ensure that the speakerphone is paired with the phone.
      3. Make sure that the phone is connected to the speakerphone. If it does not connect from the phone's Bluetooth menu or by tapping the answer/end button then follow the pairing procedure.

    • I hear crackling noises in my speakerphone.

      Bluetooth is a radio technology, which means it may be sensitive to objects between the speakerphone and the connected device. The speakerphone and the connected device may be used within 33 feet (10 metres) of each other, with no major objects in the way (walls, etc.).

  • Compatibility

    • Can I use my Jabra headset with my iPhone?

      You can use your headset with your Apple iPhone, but please note that while the headset is compatible for iPhone telephone applications, music applications may not perform correctly, e.g. Play/Pause, Skip Next/Previous, Volume Up/Down, etc.

    • Can my Jabra speakerphone work with other Bluetooth equipment?

      The speakerphone is designed to work with Bluetooth mobile phones. It can also work with other Bluetooth devices that are compliant with Bluetooth version 1.1 or higher and support a headset, hands-free and/or advanced audio distribution profile (A2DP).

  • Features

    • I cannot connect speakerphone and radio via FM transmitter.

      Please try the following steps:

      1. Make sure the radio is turned on and the speakerphone is in FM mode (FM Status Icon is on).
      2. If your radio is unabe to find the FM frequency set by your speakerphone via the search function, the FM frequency must be tuned in manually on the radio. Please read the radio manual to find out how to manually change the frequency. If your radio is in TA (Traffic Announcement) mode, switch TA off and your radio should be able to find your speakerphone when using the search function on the radio.
      3. If not tune in manually.The sensitivity of the search function on your radio determines, if it is able to find the frequency set by your speakerphone. On some radios you are able to adjust the sensitivity, thus making it possible to find the speakerphone frequency when searching. If not tune in manually. In urban areas, it might be difficult to find a clear frequency. It is therefore advisable to use a frequency in the lower or upper end of the FM frequency band (e.g. 88.1 or 107.7 MHz) where you will have the best chance of finding a clear frequency.

    • I cannot use "Reject call", "Call on hold", "Redial" or "Voice dialing"

      In order to work these features must be supported on your phone. Please consult your phone’s user manual for details.

  • Installation

    • I have pairing problems with my Jabra speakerphone.

      You may have deleted the in-car speakerphone pairing connection in your mobile phone. Refer to the section in the User Manual and follow the pairing instructions to pair it again.

    • Can I pair multiple mobile phones with my Jabra speakerphone?

      Jabra speakerphones are not multipoint-capable. You can only have one phone paired with the speakerphone.

  • Accessories

    • How can I obtain parts and accessories for my Jabra headset?

      You can order accessories at the following website:

      Shop Jabra Accessories

  • Other

    • Can my Jabra headset be charged via PC/Mac?

      The headset can be charged from a PC/Mac using a USB cable, e.g. mini or micro USB cable. Not all products have a USB cable included in the packaging. If you do not have a suitable cable already, you can purchase one from our webshop:

      http://www.buyjabra.com 

PRODUCT DOCUMENTATION

Documentation for download Language File format File size
Datasheet PDF 888,5 KB Download
Declaration of Conformity PDF 67,3 KB Download
Technical Specification PDF 189,5 KB Download
User Manual PDF 1,7 MB Download

For more support to your product, drivers, Firmware, go to the product support page

Was this useful?

Thank you for your feedback

Help Us Get Better

Please tell us why you didn't find this useful

Send Feedback Cancel